Kitchen and Balcony Door Repairs — St Petersgate, Stockport

Project Overview

British Builders attended Apartment St Petersgate in Stockport to carry out a set of approved remedial repairs within the kitchen and balcony areas.

The visit covered several reported defects affecting day-to-day use of the apartment, including a loose kitchen sink tap, a damaged kitchen drawer mechanism, and a detached or damaged balcony door handle. Although each item was a smaller repair individually, the works were completed as one coordinated apartment maintenance visit to restore functionality across multiple areas and reduce the need for repeat attendance.

The kitchen sink tap was inspected for movement at the base and checked around the accessible retaining fixings beneath the sink area. The tap assembly was tightened and adjusted where required, then tested for stable operation. The area around the tap base was also checked so that any required resealing could be completed to help prevent movement and water ingress.

The kitchen drawer unit was inspected together with its runner system, brackets, clips and front alignment. The drawer was repaired, re-fixed and adjusted as required to restore smoother opening and closing operation.

The balcony door handle was also attended to as part of the same visit. The defective handle was removed, replacement hardware of a similar style and finish was fitted, and the handle and locking operation were tested and adjusted to confirm safe use.

All works were completed with standard fixings, minor adjustment materials, replacement handle hardware, testing and removal of small associated waste from the work areas.

Scope of Work

• Attendance at the apartment to inspect reported defects in the kitchen and balcony areas
• Inspection of the loose kitchen sink tap and accessible retaining fixings
• Tightening and adjustment of the kitchen tap assembly
• Testing of tap stability and operation following adjustment
• Resealing around the tap base where required to improve stability and reduce water ingress risk
• Inspection of the damaged kitchen drawer and runner mechanism
• Assessment of drawer clips, brackets, runners and internal fixings
• Re-fixing or replacement of damaged minor drawer components where required
• Reassembly and realignment of the drawer front
• Testing of drawer opening and closing operation
• Removal of the damaged balcony door handle
• Supply and installation of a replacement handle set of similar style and finish
• Compatibility check with the existing balcony door locking mechanism
• Adjustment and testing of the new handle operation
• Testing of the balcony door locking function after installation
• Final clean-down and removal of associated minor waste from the work areas

Challenges & Solutions

• Multiple repair locations — The job involved separate defects in the kitchen and balcony areas. The engineer completed the works as one coordinated visit to minimise disruption and restore several fixtures at once.
• Loose kitchen tap — The tap required inspection beneath the sink area and adjustment of accessible fixings. The assembly was secured and tested to confirm improved stability.
• Potential water ingress around the tap base — Any movement at the tap base can allow water to track into the worktop or cabinet area. The base was checked and resealed where required to improve protection.
• Drawer alignment issue — The kitchen drawer required attention to its runner system and front alignment. Components were re-fixed or adjusted to restore smoother operation.
• Balcony door handle compatibility — The replacement handle needed to suit the existing door and locking mechanism. A similar style handle was fitted and tested to confirm correct use.
• Occupied apartment conditions — The works were completed carefully around existing kitchen finishes and balcony access, with the areas left clean and usable after completion.

Final Outcome

The approved kitchen and balcony remedial repairs were completed successfully.

The kitchen sink tap was secured, adjusted and tested, improving stability and everyday usability. The tap base was checked and resealed where required to help reduce the risk of water ingress around the sink area.

The kitchen drawer was inspected, repaired and realigned, with attention given to the runner mechanism, fixing points and drawer front position. The drawer was tested after adjustment to confirm improved opening and closing operation.

The damaged balcony door handle was removed and replaced with suitable hardware of a similar style and finish. The new handle was installed, adjusted and tested with the existing locking mechanism to confirm safe and correct functionality.

All work areas were left tidy, minor waste was removed, and the apartment fixtures were returned to a practical working condition.

Client Feedback

“The maintenance visit was completed efficiently and to a good standard. The kitchen tap was secured, the drawer now operates properly, and the balcony door handle was replaced and tested. The apartment was left tidy and the repairs were completed without unnecessary disruption.” – Property Client